Compared with most popular FMT100 (which has only 2 wires with special clamp connector for fast power cable connection to the boat battery), the FMB202 has:
3 DIN – digital inputs, (you can connect one DIN to engine switch, to report engine hours for example)
2 AIN – analog inputs
2 DOUT – digital outputs
1-Wire® connectivity (can connect digital temperature sensors, or iButton® keys to disable/enable engine start as a security measure)
The FMB202 is using Quad-band 2G GSM: 900/1800 MHz; 850/1900 MHz to communicate GPS positions to our servers.
When it is out at sea with no GSM signal, will SAVE all positions in a large internal memory, and will transmit when will re-connect to GSM signal.
FMB202 is a waterproof (IP67) tracker with, internal high gain GPS/GNSS and GSM antennas and integrated backup battery. Device is designed to work longer without power supply. FMB202 with NiMH battery can work up to 1-2 days in power saving mode, 6-30V power supply makes FMB202 suitable also for motorbikes.
The main purpose of the internal battery is to send an alert if the GPS is disconnected from the boat battery (because of a possible security incident) and to transmit location for some time after that (up to 1-2 days depending on the power saving mode it was set up).
Connecting one of digital inputs to engine switch, you will be able check journey engine hours and calculate fuel costs.
You can also get updates on cruising miles covered or total engine hours accumulated to notify you of service intervals on your engine.
|GNSS||GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS|
|Tracking sensitivity||-165 dBM|
|Accuracy||< 3 m|
|Hot start||< 1 s|
|Warm start||< 25 s|
|Cold start||< 35 s|
|2G bands||Quad-band 850 / 900 / 1800 / 1900 MHz|
|Data transfer||GPRS Multi-Slot Class 12 (up to 240 kbps), GPRS Mobile Station Class B|
|Data support||SMS (text/data)|
|Input voltage range||6 – 30 V DC with overvoltage protection|
|Internal Back-up battery||400 mAh Ni-MH battery (2.88 Wh)|
|Power consumption||At 12V < 1,9 mA (Ultra Sleep)
At 12V < 3,7 mA (Deep Sleep)
At 12V < 4 mA (Online Sleep)
At 12V < 11,6 mA (GPS Sleep)
At 12V < 27,6 mA (nominal)
|Specification||4.0 + LE|
|Supported peripherals||Temperature and Humidity sensor, Headset, OBDII dongle, Inateck Barcode Scanner, Universal BLE sensors support|
|GNSS antenna||Internal High Gain|
|Cellular antenna||Internal GSM High Gain|
|LED indication||2 status LED lights|
|Memory||128MB internal flash memory|
|Dimensions||72,5 x 73 x 27,3 mm (L x W x H)|
|Operating temperature (without battery)||-40 °C to +85 °C|
|Storage temperature (without battery)||-40 °C to +85 °C|
|Operating humidity||5% to 95% non-condensing|
|Ingress Protection Rating||IP67|
|Battery storage temperature||-20 °C to +45°C|
|Scenarios||Green Driving, Over Speeding detection, Jamming detection, DOUT Control Via Call, GNSS Fuel Counter, Immobilizer, Excessive Idling detection, Unplug detection, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip|
|Sleep modes||GPS Sleep, Online Deep Sleep, Deep Sleep, Ultra Deep Sleep|
|Configuration and firmware update||FOTA Web, FOTA, Teltonika Configurator (USB, Bluetooth), FMBT mobile application (Configuration)|
|SMS||Configuration, Events, DOUT control, Debug|
|GPRS commands||Configuration, DOUT control, Debug|
|Time Synchronization||GPS, NITZ, NTP|
|Fuel monitoring||LLS (Analog), OBDII dongle|
|Ignition detection||Digital Input 1, Accelerometer, External Power Voltage, Engine RPM (OBDII dongle)|
|CERTIFICATION & APPROVALS|
|Regulatory||CE/RED, E-Mark, EAC, RoHS, REACH|